Monument signs | Since 1995 | Doral, FL

Monument Signs in Miami and South Florida

A monument sign is a low, ground-mounted sign on a solid base, usually at a driveway, entrance or property line. Corporate Signs Inc. designs, permits, fabricates and installs monument signs for offices, banks, medical buildings, dealerships, hotels and retail centers across Miami-Dade, Broward and Palm Beach, from our shop in Doral.

Front view of the red double-faced illuminated Tesla monument sign in Fort Lauderdale

Why South Florida businesses and sign companies call us

Since 1995

Commercial signs designed, built and installed in South Florida from our Doral shop.

Licensed and insured

Licensed electrical sign work, with permits pulled under our own license.

In-house permitting

Our permit runner handles submittals, comments and inspections across three counties.

When a monument sign is the right choice

Monument signs sit at eye level for drivers and people on foot, so they work well at entrances and on properties set back from the street. Many South Florida cities and planned developments prefer a monument over a tall pylon, and in some zoning districts a monument is the only freestanding sign allowed. A well-built monument also gives the property a finished, permanent look that a temporary banner or post sign never will.

Tesla monument sign in front of the Tesla service center at 2829 N Federal Hwy, Fort Lauderdale, installed by Corporate Signs
Tesla monument sign in front of the Tesla service center at 2829 N Federal Hwy, Fort Lauderdale, installed by Corporate Signs
Tesla monument sign fabricated at the Corporate Signs shop in Doral before delivery to Fort Lauderdale
Tesla monument sign fabricated at the Corporate Signs shop in Doral before delivery to Fort Lauderdale
Fifth Third Bank monument sign
Fifth Third Bank monument sign
Mercedes-Benz dealership monument sign with landscaping
Mercedes-Benz dealership monument sign with landscaping

Monument sign styles we build

  • Single- or double-faced - double-faced signs read from both directions of traffic, which matters on busy corridors.
  • Illuminated cabinets - LED-lit faces, routed aluminum faces with push-through acrylic letters, or halo-lit letters.
  • Dimensional letters on a base - lit or non-lit letters mounted to a stucco, stone-look or painted metal base.
  • Multi-tenant monuments - interchangeable tenant panels for office parks and shopping centers.
  • Address and wayfinding add-ons - street numbers and matching directional signs so the whole site reads as one system.

Materials built for South Florida weather

Most of our monuments use an aluminum cabinet over a steel structure on a concrete foundation, finished to match the building. Faces can be routed aluminum backed with acrylic, push-through acrylic letters or polycarbonate. Sun, salt air and summer storms are hard on signs, so we choose paints, sealants and fasteners for outdoor exposure and build drainage into lit cabinets. Because we fabricate in Doral, we can check color, fit and lighting before the sign leaves the shop.

Permits, zoning and wind load

A monument sign is a freestanding structure, so it generally needs a building permit, and a lit monument needs electrical approval as well. Zoning controls sign area, height, setbacks from property lines and the sight-visibility triangle at driveways, so the sign does not block a driver's view. Miami-Dade and Broward are in the Florida Building Code High-Velocity Hurricane Zone, so foundations and structures are designed to resist hurricane-force wind on signed and sealed drawings.

Our in-house team prepares the drawings, coordinates engineering, gathers landlord or association approval, files the permit under our own license and meets the inspectors. Rules change from city to city, so we confirm the current requirements for every address instead of guessing. See sign permits for how that works.

Our monument sign process

  1. Site survey - location, setbacks, sight lines, underground utilities and the nearest power source.
  2. Design and engineering - sign drawings plus structural engineering for wind load.
  3. Permits - zoning, building and electrical review, with landlord approval first where needed.
  4. Foundation - excavation and concrete per the engineered design, inspected where required.
  5. Fabrication - cabinet, faces, letters and finish built in our Doral shop.
  6. Installation and closeout - set, wired, inspected and photographed for your records.

What affects the timeline

Every monument schedule depends on a few factors: how quickly the city or county reviews the permit, whether a landlord, association or design review board must approve first, how much engineering the site needs, foundation inspections, getting power to the sign, and custom finishes. We give you a realistic schedule after the survey, not before.

What we need from you

  • The site address and a few photos of where the sign will go.
  • A survey or site plan showing property lines and easements, if you have one.
  • Your logo files and any landlord or association sign criteria.
  • Whether you want the sign lit, and where the nearest electrical panel is.

Where we work

From our shop in Doral we build and install monument signs across Miami-Dade, Broward and Palm Beach counties, including Miami, Doral, Hialeah, Fort Lauderdale, Boca Raton and West Palm Beach. See our full South Florida service area.

Related services

Frequently asked questions

What is the difference between a monument sign and a pylon sign?

A monument sign sits low on a solid base near the ground. A pylon sign is tall and raised on poles for long-distance visibility. Zoning often decides which one your site can have.

Does a monument sign need a permit in Miami-Dade or Broward?

In most cities, yes. Freestanding signs generally need a building permit, and lit monuments also need electrical approval. We prepare and file the package and meet the inspections.

Can a monument sign be lit?

Yes. Options include LED-lit cabinets, push-through letters, halo-lit letters and ground lighting, depending on local code and the look you want.

Can you update an existing monument instead of replacing it?

Often. New faces, letters, paint or an LED retrofit can refresh a sound structure. See sign repair.

How do I get started?

Call 305-500-9313 or request a site survey with your address and a photo of the site.

Request a site survey

Tell us about your sign and location and we will schedule a site survey or follow up with next steps. Prefer to talk? Call 305-500-9313.

Corporate Signs Inc. | 5960 NW 99th Ave - Bay 8, Doral, FL 33178 | 305-500-9313 | [email protected] | Licensed and insured | Serving South Florida since 1995

Send us the site address, photos and any drawings you already have.

Request a Site Survey

Or call 305-500-9313

Ready to plan your sign project?

Request a site survey and we will walk the site, check code and map out the next steps.

Established in 1995, Corporate Signs Inc. has been a trusted partner for businesses seeking premium signage solutions. Our team of experienced professionals combines creativity with technical expertise to deliver signage that exceeds expectations.

OUR SITE

Copyright 2026. Corporate Signs Inc.